Geographic location, climate

Tabriz has a semi-arid climate with regular seasons (Köppen BSk). The annual precipitation is around 280 millimeters, a good
deal of which falls as snow during the winter months and rain in spring and autumn. Tabriz City is located at
(38°04’48” N, 46°17’30” E). averaged value of sunshine is 2616.9 hrs
2000- December 2016)
and averaged value of frost days (Every day in a year with the lowest temperature below
freezing level (0°C / 32 °F) is 81.8 days (Weather
online 2016).

We Will Write a Custom Essay Specifically
For You For Only $13.90/page!

order now

2.3.2 building geometry

In this paper in order to explore the capabilities of the proposed approach, Tabriz
municipality office building was selected, which
is set at a north-south orientation, and it is a rectangle-shaped office
building including 6 floors plus a
dome which was not evaluated in the process of this research. The three-dimensional view and plan of the building
model are shown in Fig. 1. each floor is divided into 18 perimeter zones and
one core zone. The typical floors (from 1 to 5) are simulated with one
representative floor and is multiplied to represent other typical floors. The
approach for performing the simulations includes the fenestration analysis in
order to determine the optimal fenestration due to the energy efficiency of the
building. In this process the
evaluation of fenestration was performed separately for each zone. Each modeled
zone is adjacent to the facade to assess the annual
thermal and lighting conditions produced by the facade region. The plan of
zones N2 and N3 at floor 5th are resized, so simulations for these
two zones have done separately.

The first phase of the process consists of
modeling the building and the zone/s that will be simulated. This phase is
subdivided in two different parts: modeling the geometry of the building,
modeling the fenestration patterns. For the case study, the basic floor plate
of the building was modeled in the form of a polyline and was extruded in order
to obtain the 3D model of the building. The parameters that were used to model
the building and its zones were the orientation,
number of floors, floor-to-floor height, thickness of the roof structure, and
rooms (zones). The parameters for simulating windows were window to wall ratio, window
height, number of windows and sill height which were modeled by honeybee
glazing components.

Post Author: admin


I'm Irvin!

Would you like to get a custom essay? How about receiving a customized one?

Check it out